A simple slide mod for the Dart Zone Pro MK2.
---------------------------
Key features
- A hammer to be the prime indicator
- Slightly simplified slide design
- A picatinny rail for tacticool purpose. It also functions as the rear sight.
UPDATE
- 2021-11-18 v2.1 slide fixed no-locking issue and reduced priming resistance
WIP content
- Lever style slide lock release
- Front barrel attachment
Hardware
- Stock screws for the slide
- M2.5*8mm round head screw x1 (for tac rail)
- M2.5*4mm round head screw x1 (for tac rail)
- M2*25mm pin x2
- Small torsion springs x1 (OD: 4~5mm, WD: 0.4-0.6mm, number of coils: 1.25-3.25)
Installation
Pretty straight forward. Only needs some attention on correctly install the torsion spring between the hammer and either side of the slide. The wire on both tips need to be bent and insert into the dedicated wire holes in order to stably sit in place.
Print Guide
The slide side to the the print bed is recommended, no support needed. You can also try other directions with support to get better surface finish at the side.
----------------------------------------
请尊重原创设计。未经授权，禁止商用。谢谢！
Please contact me for commercial authorization. Thanks!
Adiyahu
