Phrozen 8K RobMod 1 - Cantilever Plate Drainage Braces

I didn't like the idea of hanging my plate from the top of the gantry, all I could imagine was the PLA giving out and the plate crashing through my vat and my screen causing thousands of dollars of damage.

So I made these. They clip on to the vat handles and hold the plate at an angle allowing it to drain the top or bottom of the plate back into the vat. the braces are sturdy enough to hold a plate with a large print (tested with 1kg). Drainage holes allow for resin to drip down into the vat even it it collects along the interior of the brace.

You can use them forward or backward and the plate fits in both directions allowing for you to drain it in several orientations, drip off parts, and otherwise save resin.

Ten iterations and 1.5kg of PLA to get them right but the hold the plate firmly and with enough room that it's not resting on the linear rails.