Vudoo V22 Magazine Protector Cap

Protective cap to go over loaded magazine top to protect the exposed bullet.

I like to pre-load my magazines when going to a match, but I don't want to have that exposed match bullet get scarred during handling or in my range bag, so I designed this magazine cap/protector. It ONLY worked with LOADED magazines, otherwise the pull-down loading button gets in the way when it is at its highest position when the mag is empty.

I printed these with standard PLA, "low" quality (.26 or .28) with 100% fill since they're thin and they don't use much material anyway. Print in the STL's orientation with flat side down, and you won't need supports. On my printer with a heated bed, I didn't need any skirt or brim either.