iFlight Nazgul Evoque GPS antenna mount

This is a GPS/Crossfire mount for the iFlight Nazgul Evoque FPV drone. It replaces the stock TBS crossfire immortal T antenna mount and uses the frame spacers imbedded in said antenna mount. This is an early work in progress that I have printed and fitted onto my Evoque. I'll update this as I test and adjust the fitment.

-Ender 3 pro with a microswiss direct drive extruder
-.4mm nozzle
-Ninjaflex TPU @ 235c, 55c bed, 100% cooling@ layer 2, 18mm/s print speed,
1mm retraction @ 20mm/s
-prints fine with no supports

12/26/21 Update: I've been using the first one I printed to this day and don't see a need to change anything. I've taken my Evoque out to 2miles, smashed it against a few fences and the ground pretty hard, and the print just takes the use and abouse with no issues.