Dragon Fly BMO rigid mount

Please consider supporting me if you find it useful, it would be greatly apreciated (use the buy me a coffee or the "Tip Designer" button)

with optional m6x4 threaded screw for a pneumatic mount

similar mount is used on the final version of the Mars orbiter (files included with it, don't use these as they are different)
https://cults3d.com/en/3d-model/tool/mars-orbiter-final-version-ender3-pro-v2-cr10-microswiss-dd-hotend-stock-dragon-dragonfly

but the stl from this post will work on my other duct (alpha/beta version of the mars orbiter & solar orbiter)
https://www.thingiverse.com/thing:4807645
https://www.thingiverse.com/thing:4978511

or you can build your own duct using this

screws

• two M3x6 to mount it to the back plate
• four M2.5x6 to go into the dragonfly (I don't think m2.5x8 will fit, but if you can then use that)
• two M3 between 8mm and 12mm long (screw hole is tapered so it will get harder as the screw gets deeper, but will hold onto the plastic really well)