Kinetic Wall Art (Blossom & Mandala)

Hi~

I newly designed and built two kind of kinetic sculptures which can be used for wall decor.

To reduce the dimension of 3D printed part, the BUTTERFLY KEY JOINT was applied to easily assemble separated spoke parts. Therefore, the size of all parts are smaller than 200 mm by 200 mm and almost every 3D printer can print it.

How to make is shared from the links below. I hope your enjoyable DIY life with my work.

How to make here : https://youtu.be/_Sorwbpynls

I am so happy if you puch 'Subscribe and Like' button :) Thanks!

/Parts list
[1] 3D printed parts
- controlGear (1 ea)
- springGuide (1 ea)
- wing_segment1 (10 ea)
- wing_segment2 (10 ea)
- Joint (20 ea)
- frontWing_center (1 ea)
- front_subRing (1)
- rearWing_center (1 ea)
- rearWing_block (1 ea)
- pawl (2 ea)
- cover (1 ea)
- gap_11mm (1 ea)
- gap_14mm (1 ea)
- gap_19mm (1 ea)

[2] Non 3D printed parts
$Length of bolt includes head.
- Constant force spring (1 EA, 0.4 kg, 1000 mm, MISUMI Co.)
- Ball bearing (5 EA, OD: 22 mm, ID: 8 mm, width 7 mm)
- Ball bearing (2 EA, OD: 10 mm, ID: 5 mm, width 4 mm)
- Stainless rod (1 EA, Ø8 mm, length 115 mm)
- Stainless rod(1 EA, Ø8 mm, length 45 mm)
- Copper rod for weight (case by case, Ø12 mm, height 10 mm)
- Nb magnet (3 EA, Ø6 mm, height 3 mm)
- Nb magnet (8 ~ 10 EA, Ø8 mm, height 3 mm)
- M3 bolt (2 EA, length 23 mm, round head)
- M3 bolt (3 EA, length 15 mm, round head)
- M3 bolt (2 EA, length 11 mm, round head)
- M4 bolt (2 EA, length 16 mm, round head)
- M5 bolt (1 EA, length 17 mm, round head)
- M5 bolt (3 EA, length 13 mm, round head)
- M3 nut ( EA)
- M4 nut (2 EA)
- M5 washer (1 EA)