BK-G4 gas meter mount for AI-on-the-edge ESP32-cam

Attention! The download-link from thingiverse seems to be broken (how can that happen?). But you can access all files individually in the files section.
The thing-link seems to be broken as well. I will check how to fix this... I uploaded the file here: https://diode-laser-wiki.com/wp-content/uploads/2023/03/BK-G4_gas_meter_mount_for_AI-on-the-edge_ESP32-cam_5158546.zip Hopefully that works.

It's a fast development prototype, but it works quite well up to now. The design is made out of two parts to avoid the need of lots of support structures. This makes it a little wobbly, but if both parts are glued together, it should be fine. It was designed to be removed easily, so it uses an elastic strap to fix it to the meter. The same holds for the ESP Cam, I used the original housing and you can fix it with an elastic strap as well. I used this to find the best position of the camera but finally glued both parts in the end.
I can recommend to print it in white PLA, it helps dithering the light for less reflections. Of course, the whole thing lights up if the camera takes a picture, so it makes sense only if it's in a hidden location.