Colt Python revolver fully printable (6 and 8 inch barrel)

** Added missing Latch.stl (sorry)

Sorry for low resolution: not my fault but the original work has few polygons.

Corrected size: all other designs were wrong size. I've a real Python 6"
I referred to the correct length of the gun but the barrel bore is wrong in the design.
It should have been about 9.1mm. Don't care about this.

This is a Colt Python with a 6" or 8" inch barrel.
Choose what you want.

Use tree supports for the hand guard on lower part.
User normal supports for the rear sight on back part (or no supports!).

You can print the whole hammer (with supports) or print the left and right sides and then paste it.

Two drums: full one and empty one (for better ammo painting, if you want paint them apart).
The drum has a little pin to be polished to compensate for dimensional errors for perfect adhesion on the back of the gun.