December 11, 2021
Description
** Removable and strong wrist rest for TX16 / TX16s - parametric (openscad) **
Allows to use the transport box or small Protector Case, assemble it on the field in few seconds.
The only modification on the transmitter is some nearly invisible holes in the rubber of the side grip pins (in the center). The case has already the holes so it is untouched.
You will need: m2 screw/nut, 3mm rods, epoxy glue.
Two small 3mm rods are inserted deeply and glued inside the part (p1) and right angle bend.
License:
Creative Commons - Attribution
Guillaume_F
