Butterfly Jewelry Box

Printed on Anycubic Vyper, with PrusaSlicer, using Creality CR6-SE profile with modified bed settings.

Additional Prusa Slicer settings I used:

• 210C/205C extruder temp, 60C bed temp
• 0.2mm layer height
• 3 perimeters
• seam position aligned
• external perimeters first
• skirt height 1
• doubled all 4 jerk values

The box is incredibly easy to print, no supports.

The lid requires supports for the overhang of the detailed butterfly. See attached image of PrusaSlicer support settings that I used. Though perhaps there are better options. I'm open to suggestions in the comments.