CR10 Magnetic Fan Shroud

Tired of screwing and unscrewing your fan shroud to work on your fans, hotend, nozzle, thermistors, or heater cartridges? Well, look no further. This nifty magnetic shroud snaps into place and holds on tight for the ride.

Reddit Post with video https://www.reddit.com/r/3Dprinting/comments/rf0mcd/my_custom_magnetic_fan_shroud_for_my_modified/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

Print with the front of the shroud on the build plate.

Build Instructions:

Super glue the magnets into the magnet holes. Make sure the correct faces of the magnet are facing outwards when glueing so the magnets attract and do not repel.

Install your part cooling fans and then the hotend fan. Each fan can be attached with 2 out of 4 screws.

Required Items:

Superglue (I used Loctite)

Screws: (to fix the fans inside the shroud)
2 to 4 - m3x8
4 to 8 - m2x6

Neodymium Magnets - 10mm x 3mm
https://www.amazon.com/dp/B07842PSJD/ref=cm_sw_r_oth_api_glt_fabc_6HE54RY26TZHDPEJ57VA?th=1

Part Cooling Fans - 12V 40x40x10mm
https://www.amazon.com/dp/B08R9HWVZY/ref=cm_sw_r_oth_api_glt_fabc_HQ9PR5XWHJ27WYJWB24Y

Hotend Fans - 12V 40x40x10mm
https://www.amazon.com/dp/B0711FVD48/ref=cm_sw_r_oth_api_glt_fabc_0Q39Q34W9F1S96TSD2D0?_encoding=UTF8&th=1

Microswiss All metal hotend (Might be compatible with stock CR-10 Hotend).
https://www.amazon.com/dp/B07NDL3PNX?ref=ppx_pop_mob_ap_share