Articulating 4.3" PanelDue for RatRig with Raspberry Pi 4 integration V-Core 3

Print in PETG, have your first layer be dialed. This is designed to be mounted to a RatRig V-Core 500 in the area where the door hinge would mount.

Edit I have added two more files:

1. New Face plate that allows the insertion of four M3 heat inserts.
2. A new back case that is slightly bigger to allow for the insertion of a RPI4.

Here is a link to the Amazon listing for the PanelDue 4.3" ; Mine is genuine and you should buy originals too. But Duet doesn't make a 4.3 Panel Due. But you should try to get a genuine PanelDue module. https://www.amazon.com/Homyl-Touchscreen-PanelDue-Controller-Resolution/dp/B07JHP29CZ?keywords=4.3"+Paneldue&qid=1639512394&sr=8-2&linkCode=sl1&tag=ls3d-20&linkId=52e8bc3a356ba6864dea3e134b1a063e&language=en_US&ref_=as_li_ss_tl

Raspberry Pi 4: https://www.amazon.com/Homyl-Touchscreen-PanelDue-Controller-Resolution/dp/B07JHP29CZ?keywords=4.3"+Paneldue&qid=1639512394&sr=8-2&linkCode=sl1&tag=ls3d-20&linkId=52e8bc3a356ba6864dea3e134b1a063e&language=en_US&ref_=as_li_ss_tl

Remember you will need 2.5mm screws for the pi.