USB CABLE ROLLER Remix (with knob, minimal supports and 12mm hole for a ferrite)

This is a remix of Findusdwarf's USB CABLE ROLLER - which is a remix of:

nrv005's Cable Reel (USB)
which is a remix of Mcpea1477's USB Cable Reel
which is a remix of Manabun's USB Cable Reel

This is like a Russian Nesting Doll of Remixes lol. All of these and the original are very cool designs, but I needed to make some changes for them to work with my keyboard cable which has a 10mm ferrite bead on the cable near the USB plug. I made some other adjustments while I was at it, below is a list of the major changes:

• Added a 12mm hole for a ferrite bead to pass through.
• Added a knob to the top for easier turning.
• Redesigned some parts to print with minimal or no supports.
• Made the threads a looser fit

The print shown has most of the changes, except for the 12mm hole (I drilled the one shown in the pics). The 12mm hole though will look much nicer printed I'm sure.

I recommend using supports on the base, however you can minimize them by setting the "overhang angle" up to something like 60% and they should be easy to remove.

It works really well, thanks to the original designers for sharing their work!

If you find these models useful, please post a like or a comment with some pics of your prints.

I regularly update my current projects and other things I'm working on at my blog.
And if you like some of the stuff I design, you can follow me here or on Printables, to see what new stuff I post.

Thanks for looking!