Summary

This cable tie base is 19mm (3/4") square and just 5mm high, and has been designed to print easily and quickly at 0.2mm layer height and without supports. You just need to add some double sided tape (the thicker "foam" tape works best).

The openings have an arched design to reduce the bridging length, and it features internal slopes to make it easy to route the cable ties through the base.

The entire lower surface is solid to ensure good contact with the full width of the double-sided tape.

Print Settings

Printer:

Anycubic Kossel Delta

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>30%</p></div></p>                                                    <strong>Filament:</strong> Unknown PLA                Violet                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Prints easily without supports at 0.2mm and seems very strong.</p></div>

Cable Tie Base

Cable Tie Base

Related Models