Sculpfun S9 Mounting feet

Mounting feet for Sculpfun S9.
It provides an additional screw to block the Laser Engraver on the feet.
Feet increase high of engraver of 20mm (size used by Ortur honeycomb support https://amz.run/5Ba5 )

Needed materials:

• 16 x : M4 nuts
• 4 x : M4 x 10mm screws (to block the laser engraver)
• 12 x : M4 x (10 + width of the support) mm screws (in my case 30mm)