Sun Hood (shade) On Camera monitor, SmallHD Focus 5"

This custom sun hood(or shade) is optimized for SmallHD Focus 5" HDMI. It was custom designed only for 3D printing from the modeling stage. (I think it can be mounted on similar SDI products, but I haven't tested the actual attachment.)

The sun hood is designed to provide an enhanced viewing experience even in poor lighting conditions. (Sunvisor for outdoor shooting. Reliable protection from the sun and ambient light)

Designed to fit the shape of SmallHD Focus 5 and 4 grooves on both sides, it is easy to fix and attach and detach the hood. It is designed for normal use with the bundle tilt arm.

Due to the limitations of FDM (Fused Deposition Modeling) 3D printing, the surface of the print was not smooth, and I did not like the glossy properties of the filament material, so a photographic matte tape was used as a surface finish. In addition to the effect of preventing light scattering, it is also recommended to finish with matte taping, as it can be expected to be easily broken by external impact or to prevent deformation due to heat.

Print file sharing is for sharing ideas. For personal use only. Commercial use is not permitted.

See the link below for more details and print files (STL).
https://surplusperson.tistory.com/835

If you found my design useful, please donate what you think is worthwhile to my paypal.me. Your donation is useful for a wider variety of lens replacements.
https://paypal.me/suplusperson