Bicycle 31.8mm Handlebar Extension Kit

Have you ever faced a situation, where you've ran out of real estate on your handlebar, or just wanted more room by reclaiming that handlebar section usually occupied by stem clamp or only wanted to position your lights or accessories a bit different be it upwards, backwards or outwards? Here's my simple solution for that, a handlebar extension for most of the common bicycle handlebar diameters. Helps also, if you want to place an item that needs to clamp on 31.8, but your handlebar only has smaller diameter sections available.

Therefore this is a bicycle handlebar extension for mounting lights and accessories that have capacity to clamp on 31.8mm handlebar (mid) sections. Works well for lights as well as accessories that conform to the given clamping diameter.

Included are variants for five different handlebar clamping diameters. Available are 31.8, 26.0, 25.4, 24.0 and 22.2. There is some tolerance on each of them to ensure proper fit on most bars, measure yours to print the right one.

In addition you need 2x M4x16mm bolts and 2x M4 nuts, whether plain or nyloc is the same, but using some thread locker is advisable if you use plain M4 nuts, but that's not an absolute necessity after all.

Please share your makes if you choose to print these, thanks!

Checkout also the small accessories 22.2mm diameter handlebar extension here: https://www.thingiverse.com/thing:5179769