January 1, 2022
Description
Servo On Axle mount for full scale 1/5 servo for the Axial SCX-6. It`s solid and will eliminate movement. There are 2 arms, one for the original hubs and one for the alu hubs.
Material needed:
2 x M3 10mm screws for arm.
1 x M5 50mm bolt for links. (V2.1)
1 x M5 20mm for the arm hub mount.
2 x M5 25mm For the V3 links.
The part may need editing, it’s shared before i have fully tested it.
Edited the V1 because the shock hit the part on the right side, changed out with V2.1 with clearance and a chamfer to the link openings.
V3 has screw holes from both sides, so it uses two m5 x 25mm screws insted of the one m5 x 50mm screw.
Please share experience and pictures of you build and have fun!
License:
Creative Commons - Attribution - Non-Commercial
Alexjoha
