Raspberry Pi Mount for IKEA Skadis

Open mount to hang a Raspberry Pi 3B+, Pi 4 or Pi 5 from an IKEA Skadis peg board using CSD_Salzburg’s Skadis universal hook.

3 versions available:

• raspberry_pi_skadis_mount - (Pi 3/4 only) No extra hardware needed, Pi clips into place.
• raspberry_pi_skadis_mount_rpi5 - (Pi 5 compatible) Same as the original Pi 3/4 mount but one clip moved to accommodate the Pi 5. Should still work with the 3 or 4.
• raspberry_pi_skadis_mount_for_m2.5 - No clips, Pi secured by 4 M2.5 screws.

The Pi can be mounted in any direction using 2 universal hooks.

Recommend printing everything above the 4.5mm base at 100% concentric infill (or increase the number of perimeters/walls) to achieve the best quality mounts and clips.

No supports needed.