January 4, 2022
Description
This is an upgrade for the Voron Stealthburner for use with the Bondtech LGX extruder. The upgrade also included a cable management for JST-SM connectors, which can be attached with a corresponding cover.
The JST-SM connectors are connected to the corresponding holes on the printed mounting plate.After that, this mounting plate is screwed to the cover and then attached to the LGX extruder.
You need the following screws:
2x Cylinder head screws M3x30mm
2x Cylinder head screws M3x14mm
4x Cylinder head screws M3x20mm
4x Countersunk screws M3x6mm
You need the following inserts:
4x Thread insert M3 x 4mm (L) x 4mm (OD)
4x Thread insert (ruthex) RX-M3x5.7mm
(https://www.amazon.de/ruthex-Gewindeeinsatz-St%C3%BCck-Gewindebuchsen-Kunststoffteile/dp/B08BCRZZS3/ref=sr_1_5?keywords=ruthex+m3&qid=1641338701&sprefix=ruthex%2Caps%2C106&sr=8-5)
The stealthburner project can you find here:
https://github.com/VoronDesign/Voron-Afterburner/releases/tag/sb-beta0
License:
Creative Commons - Attribution
mmario0706
