Voron 2.4 5" LCD Front Mount

Designed for a 5" LCD, should sit flush to the desk... held in by 3 x M3 screws.

I poked the power/usb and hdmi cable through one of the hex holes at the sides.

To fit the screen you require 4 x M3 screws.. .then to fit it to the printer you need a further 3 x M3 screws.

Printed in ABS (can use any material as its well away from any heat), I printed it on a textured bed to give it a nice look. Printable without any support.

The screen I've been using is quite common, example is - https://www.aliexpress.com/item/1005002550189338.html

Thanks,

Steve