2020 aluminum extrusion Wire guide/Wire stay

Requires 2 M5 short screws and those 2020 extrusion nuts. Allows for several small wires to be routed through, and secured in place using a zip tie through the small diagonal cut in the part.

My use case is the wires coming from the back of the heated bed on a Hypercube printer, combined with some tubing to keep the wires together it allows me to route them around one of the z axis guide rails and down to the bottom where I have the electronics, without getting them tangled in the belts or other parts.

As always I've included the blend file so you can play with it as needed, everything is done using booleans so it should be relatively easy to remove the diagonal cuts for the zip ties, or change the sizes to suit your needs. Remix is added as I've included it in the .blend

depending on print orientation you might want to include supports to make sure the diagonal sections print okay. Cura seems to think it's not watertight but Cura is full of lies, it sliced and printed fine for me.