Anemometer - Wind speed - Wind direction

/* UPDATE 7/7/2022 - ADDED /
/ Anemo16.stl was missing /
/ picture on print position /
/ precision on post-print */

Anemometer v1.0 - Solar - Wifi - Bluetooth

For complementing with a single axis solar tracker you can see
https://www.thingiverse.com/thing:5385253

BOM

1 x ESP32 like Firebeetle, or ESP WROOM Lolin32 or LOLIN32 with ESP32 240MHz Dual-Core, WiFi, Bluetooth/BLE, 4MB Flash, Charging Circuit, Arduino IDE Compatible
1 x AS5600 Absolute Encoder PWM / I2C Port Precision 12-bit (wind direction)
2 x Ky 003 Magnetic Sensor Module DC 5 V (Wind Speed)
1 x INA3221 Triple Channel Shunt Power Supply Voltage Monitor Sensor
1 x Solar panel 12W 12v 20W or more recommended especially for winter saison in the north of Europe
4 x ball bearings 624Z 4 mm x 13 mm x 5 mm Single Row
2 x M4 40mm bolt + nolt
1 x Waveshare Solar Power Management Module for 6V~24V Solar Panel
3 x magnets for the wind speed
1 x magnet for the AS5600 encoder (wind direction) se the datasheet. In my case I used the magnet of a old defective RC chopper motor diameter 5mm
2 x 18650 (2 x 2000mA/h) Aku recycled from laptop battery pack
1 old usb cable of the desired length
6 x screws for the wind speed and direction
2 x threaded rod 80mm length