Electric Toothbrush and Clippers Stand Holder / Mount

This toothbrush and clippers holder is designed specifically for the following two products:

1. Oral B Pro 700 Electric Toothbrush (should probably fit any Oral B Type 3757 charger stand).
2. Wahl Colour Pro Style Clippers WA9639-2112.

There are 4 STL's included in this print with no supports required.

1. Base - Printed at 0.32mm. This was printed with the front face down as I preferred this look. There is also bridging required for the cavity where the power cable will be stowed away.

2. Toothbrush holder - I printed this with a layer height of 0.24mm and with it's back-side down. i.e., the side that connects to the base. This will produce nicer curves and cleaner text. Make sure you get good adhesion as my first attempt had it fall over mid-print. Alternatively use a raft if required.

3. Clippers holder - Printed at 0.24mm and similar to the toothbrush holder, I printed this with it's back-side down for nicer curves.

4. Joints - The dowel joints were printed at 0.2mm and the little man logo was printed at 0.04mm as I wanted fine details.

Depending on your fit, you may require superglue between the parts for a stronger hold. Mine was quite tight so didn't use any. Also to secure this to the wall, you can use 3M velcro strips or any decent strength double sided tape.