iPhone 12 MagSafe Charger Stand

I received an Apple MagSafe wireless charger for the holidays and, because it rests on the table, I cannot see the screen on my iPhone 12. My previous wireless chargers have all been stands, which I prefer, so I decided to design one for this charger. The challenge is that it magnetically attaches to the phone, so the spot for the charger itself has to be precise. In other words, this will not necessarily work for any phones other than the regular iPhone 12 (iPhone 11, X, 8, etc. might be compatible, but the Max, SE, or other sizes might not work).

Also, if you want to adapt it to your specific iPhone, so not just scale it up or down. That will change the size of the slot for the charger and for the cord to pass through. It's s tight squeeze to get the cord through as it is, so it will definitely not go through if it is any smaller.

You will also find that the MagSafe wireless charger does not just set in there on its own. I could not put any type of clip or other method of holding it in because that would interfere with the connection it makes with the phone and it might not wirelessly charge. My solution was just to put a 3M two-sided sticky on there. That way, it will stick and I can take it off in the future if I ever need to.

IMPORTANT: THIS SHOULD BE PRINTED ON ITS SIDE AND WITH SUPPORTS OR THERE IS A PRETTY DARN GOOD CHANCE IT WILL NOT PRINT PROPERLY