Classic Ford Bronco (66-77)

I spent hours searching for a free model of a classic Bronco, I was only able to come up with 2 models and neither of them was quite accurate enough for me. My first car was a 1974 Bronco and I have an ever-growing collection of models, I figured it was about time that I printed my own. So I spent several hours modeling this version in Fusion 360. The inspiration to create this model came from Tony_D's wonderful 2020 Bronco model https://www.thingiverse.com/thing:4792805

V3 Stonger Mirrors!

• V3 has a fix to make the arms that support the mirrors larger and easier to print. There is only V3 for the hard top version and the topless version, as the door cutout version does not have mirrors.

** Step Files included**
There are now 3 cab configurations for V2

1. Full cab with hardtop
2. No top, with optional roll cage and steering wheel
3. Classic door cutout with no top with optional roll cage and steering wheel

12 screws are needed, 4 (M2x8) for the axel caps, 2 (M3x8) for the cab to chassis, and 5 (M2x10) for the wheels

What to Print*
For Option 1:

• Bronco Cab HT V2 (Print 1)
• Bronco Chasis V2 (Print 1)
• Bronco Wheel (Print 5)
• Bronco Axel (Print 2)
• Bronco Rear Cap (Print 2)
• Bronco Front Cap (Print 2)

Option 2:

• Bronco Cab NT V2 (Print 1)
• Bronco Chasis V2 (Print 1)
• Bronco Wheel (Print 5)
• Bronco Axel (Print 2)
• Bronco Rear Cap (Print 2)
• Bronco Front Cap (Print 2)
• Bronco Roll Cage (Print 1)
• Bronco Steering Wheel (Print 1)

Option 3:

• Bronco Cab ND V2 (Print 1)
• Bronco Chasis V2 (Print 1)
• Bronco Wheel (Print 5)
• Bronco Axel (Print 2)
• Bronco Rear Cap (Print 2)
• Bronco Front Cap (Print 2)
• Bronco Roll Cage (Print 1)
• Bronco Steering Wheel (Print 1)

Changes for V2

• Fixed the height of the rear bumper
• Increased the size of the Bronco text to make it print better
• Added 3 M3 Screw holes to mount the cab to the chassis
• Added spare tire mount to the tailgate

There are 6 different STLs to print for the original
8 screws are needed, 4 (M2x8) for the axel caps and 4 (M2x10) for the wheels

• Bronco Cab: The majority of the body with a flat bottom so it can be printed (Print 1)

• Bronco Chasis: Lower part of the body and axel Mounts(Print 1)

• Bronco Wheel: All 4 wheels are the same (Print 4)

• Bronco Axel: Axel is the same front and rear (Print 2)

• Bronco Rear Cap: Cap to mount the rear axle to the chassis (Print 2)

• Bronco Front Cap: Cap to mount the front axle to the chassis (Print 2)

• The Step file has also been included to make any modifications easier

• Technical drawing units are mm

• Link to the other classic Bronco models I found: https://classicbroncos.com/CAD/

You can, without permission, copy, modify, distribute, display, or perform the Item, for non-commercial uses ONLY. For any commercial uses, you must have written consent from the original creator.