Milwaukee M18 and FORGE Battery Rack M18 - Single, Double and Quad

Wall or ceiling mounted battery rack to suit Milwaukee M18 batteries.

Updated 2025 - These will also fit the 8Ah Forge batteries, Thanks to chefencore for testing this out. If you are using the standard M18 batteries, these will have just a little more space between them. Also made some small optimizations to improve quality when printing vertical.

Available in single, double or quad.
Small amount of support sometimes needed in the slot as pictured.

I recommend printing these standing up as pictured, Available in single, double, triple or quad.

When printed vertical there no support needed. If you are printing it flat a small amount of support needed in the slot. I have printed in PLA and mounted in my work truck, have been working well for over 2 years so far. Have also printed in ABS and PETG with great success. I use 3 walls and 8% infill. If printing in ABS or you struggle with bed adhesion you might want to think about a brim when printing vetical

I also have Hitachi (https://www.thingiverse.com/thing:4738249) and Makita (https://www.thingiverse.com/thing:4738258). Hopefully more coming, Check out my other items.