Ender 3 V2 Bondtech LGX mount for Ender 7 Style Shroud with PrinterMods MDD1.3 Linear Rails

I could not find a mount that worked specifically with my equipment for my Ender 3 V2. The goal was use a Bondtech LGX extruder in a direct drive configuration with the Ender 7 Style dual 4010 fan shroud all mounted to a printermods MDD v1.3 plate with linear rail conversion. I am not an expert at 3D modeling so some filing and reaming of holes may be required but in my setup everything fit without modifications.

Supports are required for some pieces. All pieces can be printed in the orientation as downloaded.

• LGX MDD 1.3 v2 and LGX MDD 1.3 v2_w Chain can both be printed without supports
• MDD 1.3 BL Touch v2 needs supports touching build plate only
• Ender 7 Style Blower for MDD 1.3 v2 needs supports touching build plate

I included the un modified front plate for convenience but can also be downloaded from the original source. Instructions for printing and assembly can be found here.
https://www.thingiverse.com/thing:4897631

Most of the nuts and screws can be re-purposed from the original hot end but I highly recommend getting an assortment of M3 nuts and bolts. It comes in handy for future projects as well.
https://www.amazon.com/dp/B07HQC1CYF?psc=1&ref=ppx_yo2_dt_b_product_details

Lastly, I used a microswiss clone hot end but the Stock MK8 will work as well.

Due to the close proximity to the hot end I recommend printing in PETG or better