Nissan Laurel C35 for 1/10 Chassis

I had recently printed the Chasis 1/10 Adaptable by dukedoks and wanted to print a shell for it. I came across ninjarixx's Nissan Laurel C35 and figured I'd try and make it work. The body was scaled to adjust tire fitment and then I added locations for the magnets to be mounted underneath the shell. The shell was then split up into 3 separate pieces for ease of printing. I then had to modify the front bumper for the Chasis 1/10 Adaptable for the Shell to fit over it. I have included the 3 shell pieces and the modified front bumper.

To assemble the C35 Shell I used 14 x M3x8mm screws and 14 x M3 nuts. I then used the same magnets that dukedoks used on the chassis.