February 1, 2022
Description
Simple Low profile cooling upgrade.
Optimized the airflow to the printed part.
The .3 version is nice in combination with the Dragon Fly bms hotend.
The .4-GapFix version is 1mm further from the heatbed. (updated after tip that there was a gap)
The bridge test is done with PETG at 50mm/s LH=0.2mm,0.65with Fan at 75%, without the special Cura settings for bridging.
Bridge test: https://www.thingiverse.com/thing:476845
License:
Creative Commons - Attribution
hansvanlin
