![Wheel Design for [thing:5019195] 3D Printer File Image 1](https://wsrv.3dprinterfiles.com/?url=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/9c/2e/95/27/c5/IMG_0506.JPG&w=1024&h=1024&fit=contain&cbg=white&n=-1&w=828&h=828&output=webp&q=100&n=40 "Wheel Design for [thing:5019195] 3D Printer File Image 1")
![Wheel Design for [thing:5019195] 3D Printer File Image 2](https://wsrv.3dprinterfiles.com/?url=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/4a/c0/2c/01/69/Font-Half-Wheel.png&w=1024&h=1024&fit=contain&cbg=white&n=-1&w=828&h=828&output=webp&q=100&n=40 "Wheel Design for [thing:5019195] 3D Printer File Image 2")
![Wheel Design for [thing:5019195] 3D Printer File Image 3](https://wsrv.3dprinterfiles.com/?url=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/df/78/ba/46/68/t2.png&w=1024&h=1024&fit=contain&cbg=white&n=-1&w=828&h=828&output=webp&q=100&n=40 "Wheel Design for [thing:5019195] 3D Printer File Image 3")
![Wheel Design for [thing:5019195] 3D Printer File Image 4](https://wsrv.3dprinterfiles.com/?url=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/41/58/c9/3f/12/Rear-Half-Wheel.png&w=1024&h=1024&fit=contain&cbg=white&n=-1&w=828&h=828&output=webp&q=100&n=40 "Wheel Design for [thing:5019195] 3D Printer File Image 4")
![Wheel Design for [thing:5019195] 3D Printer File Image 5](https://wsrv.3dprinterfiles.com/?url=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/73/b0/1f/51/c6/t1.png&w=1024&h=1024&fit=contain&cbg=white&n=-1&w=828&h=828&output=webp&q=100&n=40 "Wheel Design for [thing:5019195] 3D Printer File Image 5")
February 9, 2022
Description
Trying out some new TPU & decided to print a tyre, chose this one:
https://www.thingiverse.com/thing:5019195
I found it easier to split the tyre & print both halves, then use CA glue to join them.
I have included the 2 split tyre files.
Not just happy with the tyre, I knocked up a quick wheel design for it, again, two halves that are inserted from each side of the tyre & CA glued together.
You'll need a bit of force to push and hold the two wheel halves while gluing, so be aware, I purposely designed them to be tight and ever so slightly narrow.
Designed for 0.4mm nozzle @ 0.2mm layer height.
Print in orientation as is.
Supports are required for the wheel rims.
Centre hub takes a 6mm shaft.
Happy Printing ;)
License:
Creative Commons - Attribution
1CM69
