SRAM AXS Wireless Blip Holder

All -

Here are 3D printable Wireless Blip holders. Include are flat bar and TT versions. Also included is a .STL of the Wireless Blip if you would like to roll your own holders.

Please print with a brim/skirt and oriented as shown. Supports should not be required but may be necessary depending on your setup.

You will need a M3 x 14 mm socked head cap screw and an M3 nut to complete the assembly. McMaster P/N below for reference.

M3 x 14 mm Socket Head Cap Screw: https://www.mcmaster.com/91290A119/
M3 Nut: https://www.mcmaster.com/90592A085/

Happy printing !