DNL Key organizer

Key organizer for adjustable number of keys. Uses two M3 bolts to hold everything together. I use two M3x8 hex rivets on the bottom side - you don't have to have the M3 bolt exactly to the size with those. Supportless print.

Looks nice if you switch filament after a few layers.

How to put it together:

1. Start with the "Bottom". Put a hex rivet through the upper hole.
2. Stack up the keys on the rivet. Put "KeySpacer" between each two keys.
3. Put on the "Top" and put in the M3 screw to hold the keys together.
4. Put another hex rivet through the second slot.
5. Stack enough "Spacers" on the second slot hex rivet so that the column has the same height as the keys column.
6. Put the second M3 screw through the side hole from the top and tighten it all together.