Raspberry Pi 400 Keyboard Wall Mount

In this remix, I have taken apart the original "print in place" thing, which was a pain to print and separate, divided it into a support piece and an arm piece, and replaced the previous joint with a simple column and socket. The two pieces are joined by inserting the column of the arm into the socket of the support and securing the connection with a M3x12 bolt. I then mirrored each part, creating Left and Right pairs.

Each of these parts can be printed separately or in a "one at a time" arrangement on the bed. Or if you prefer, I have also provided "Kit" with all four parts that can be printed all at one go.