Summary

I tryed to 3D print the garment for grogu, although I have to add sleeves.

Note: This gcode is for 0.4mm nozzle and normal TPU filament.
This stl file have to slice with the following settings.

     Layer height=0.2mm     Line width=0.4mm     Wall thickness=0.8mm     Top/Bottom thickness=0     Infill Density=25%     Infill Pattern=Gyroid

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>i3 MK3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>25</p></div></p>                                                    <strong>Filament:</strong> any TPU                gray                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Infill Pattern= Gyroid</p></div>

The garment for grogu

The garment for grogu

Related Models