Fractal Meshify 2 XL Front Phanteks Neon RGB Brackets

The Fractal Meshify 2 XL has a rather bland design. Fortunately, Phanteks Neon RGB strips can add some excellent flavour to the front behind the mesh panel. However, the adhesive on the provided brackets isn’t strong enough.

This is a custom designed set of brackets specifically for a 1M long Phanteks Neon RGB strip, and a 360mm radiator in the front of the case. I’m using an EK CoolStream PE 360, but I would imagine any 360mm radiator will have the mounting holes in the correct location.

Due to the screws being inset into the front panel, I would recommend using a 1mm nylon washer to bring the bracket level with the rest of the front panel plate. This will prevent the strip slightly tilting inward.

The Meshify 2 is the same width, but shorter than the XL. I don’t have a case to test, but these brackets may work with the standard Meshify 2. If it does, leave a comment!

Print settings don’t matter for these brackets, and they’re not visible. So go for the fastest print you can get away with! PETG is recommended, but PLA works too as long as the area doesn’t get too warm.