Analog Module Bay Mount quick release for V3+V2 Adapter on DJI Goggles

### Now on [Printables!](https://www.printables.com/model/142878) _Update 2022-05-12:_ Design tweaked for the V3 again after some feedback from folks. Personally tested on both Rapidfire + TBS Fusion modules! _Update 2022-04-02:_ MAJOR DESIGN UPDATE! V3 adapter has been overhauled to successfully fit other analog modules like the TBS Fusion. Tested and working great with the Fusion and the RapidFire! _Update 2022-03-15: Now redesigned for the V3 adapter PCB! I bought one just to model for y'all, strangers on the internet._ Modular quick release module bay for your DJI FPV Goggles. For the _V2 Adapter Board_ ([like this on RDQ](https://www.racedayquads.com/products/analog-fpv-fatshark-module-adapter-for-dji-digital-fpv-goggles)) and the V3 like [on pyrodrone](https://pyrodrone.com/products/analog-fpv-fatshark-module-adapter-v3-0-for-dji-digital-fpv-goggles). Works with Rapidfire module, TBS Fusion, etc– any standard fatshark module. _Except. As of 2022-02-26 I haven't tested it with the TBS Fusion yet. If you've got one please send me a [discord](https://b.link/t4discord)/[telegram](https://t.me/coolwheel) ! I want to make sure it's 100% perfect like it is with the rapidfire._ [](https://gfycat.com/flashylightgreatdane) ### Parts list and how to print Print as-orientated: 1. **V2/V3-adapter body**: Biggest part, holds the module. Needs support but only on the bottom. - Two fit options: std and tight. I prefer tight on my RapidFire since I never need to remove it. 2. **detach mount A goggle**: Bolts to the goggles goggle strap bolts using the stock bolts. No support but needs brim. 3. **detach mount B adapter**: Clips then screws into the module adapter PCB. Print with no support but needs brim. Comes in 0.3mm clearance and 0.2mm clearance. If 0.2 is too tight try 0.3! - Optional: Don't want the quick release option? Print `bolt-together mount` instead of the A + B parts. ### Other hardware: - 2 small wood screws that come with the v2 adapter. Works fine with one, and other screws will work fine. ### Material: PLA, PET-G, HT-PLA+! Prints great in **rigid plastic**. PLA, PET-G, or my favorite HT-PLA+. ### Post your makes! [](https://www.thingiverse.com/thing:5145921/make) Please post 'em! Really! Take a cameraphone photo of your print in all its glory and show it off! Plus it really helps get this design out there to the world. ### Message me on [discord](https://b.link/t4discord)/[telegram](https://t.me/coolwheel) for - customizations - different engravings - different variation ideas - any issues: printing, design, fit, etc - to show off / geek out about your result - say howdy Designing stuff is fun but interacting with cool people and hearing about their adventures is better. I can generate any variation / engraving easily, message me on [discord](https://b.link/t4discord)/[telegram](https://t.me/coolwheel) and/or leave a comment and let's make your perfect version. I only ask that you post a make! If you'd like the CAD or STEP file too, no problem. I've already helped a bunch of great folks! Send me a ping