MYNT 3D Station

This is a station for the MYNT3D Printing Pen Pro.

In addition to the 3D printed parts you will need:

• MYNT3D Professional Printing 3D Pen with OLED Display
• Overture 200mm x 200mm Adhesive Backed Build Surface. These are often included for free with Overture Filaments, but if you need more they can also be purchased as a five pack separately.
• Two Rubber Grommets - 3/8" Inside Diameter, 1/2" Panel Hole Diameter, 1/4" Panel Thickness
• Five M4 x 35mm Stainless Steel Button Head Hex Screws
• Three M4 x 25mm Stainless Steel Button Head Hex Screws
• Eight M4 Stainless Steel Nuts

Finally, you will need to laser cut a 1/4" aluminum panel using the Mynt 3D Station - Base.step file. If you do not have a laser cutter capable of cutting this, you can have it cut by a service like OSH Cut. Codes for a considerable discount off your first order can be found online.

Mynt 3D Station.step and Mynt 3D Station.f3d are included in case you would like to make modifications to the design. Please post any iterations as a remix/make of this original design.