Star Wars Inspired Datapad

The new Star Wars Galactic Starcruiser makes heavy use of your phone as a data pad. So I figured I should make a proper case for it!

This is loosely based on the one Tech uses in Bad Batch. It is sized for an iPhone 13 pro. I think the 12 pro might work too -- they aren't much different in size, but the camera position is slightly different.

Unfortunately I cannot reliably customize these for other phones, so this is the only version that will be provided.

To assemble it, you'll need 4 3mm x 5mm heat set inserts. This is what I used:
https://smile.amazon.com/gp/product/B07Q1HPJG6/

You'll also need 4 3mm x 5mm screws.

Your phone will get placed into the main body, then the privacy screen will screw over that, locking the phone in between. You will have access to the cameras and screen, but the lightning port and buttons are blocked. The magsafe charger DOES work through the case so you can recharge without taking it out.

There are some small alignment holes in various places. Use small sections of filament to help line up the parts. ~ 13 - 15 mm lengths should work.

Paint and decorate as desired!