1/2" PVC Drilling Jig - 1/2" Bit 2.5" Spacing

This is a drilling jig used to drill 1/2" holes into 1/2" schedule 40 PVC pipe with 2.5" center to center spacing. This was designed to mount to a drill press base. Please read through the section below to learn more about this jig.

When printing this jig, the only supports needed are below the two alignment fingers.

When you import this part into your slicer software, it will likely need to be rotated to lay flay on your build surface.

1/2" PVC - Metric Drill Bit
1/2" PVC Drill Jig - 12mm Bit - 1" Spacing
1/2" PVC Drill Jig - 12mm Bit - 1.5" Spacing
1/2" PVC Drill Jig - 12mm Bit - 2" Spacing
1/2" PVC Drill Jig - 12mm Bit - 2.5" Spacing
1/2" PVC Drill Jig - 12mm Bit - 3" Spacing

1/2" PVC - Standard Drill Bit
1/2" PVC Drill Jig - 1/2" Bit - 1" Spacing
1/2" PVC Drill Jig - 1/2" Bit - 1.5" Spacing
1/2" PVC Drill Jig - 1/2" Bit - 2" Spacing
1/2" PVC Drill Jig - 1/2" Bit - 2.5" Spacing
1/2" PVC Drill Jig - 1/2" Bit - 3" Spacing

3/4" PVC - Metric Drill Bit
3/4" PVC Drill Jig - 12mm Bit - 1" Spacing
3/4" PVC Drill Jig - 12mm Bit - 1.5" Spacing
3/4" PVC Drill Jig - 12mm Bit - 2" Spacing
3/4" PVC Drill Jig - 12mm Bit - 2.5" Spacing
3/4" PVC Drill Jig - 12mm Bit - 3" Spacing

3/4" PVC - Standard Drill Bit
3/4" PVC Drill Jig - 1/2" Bit - 1" Spacing
3/4" PVC Drill Jig - 1/2" Bit - 1.5" Spacing
3/4" PVC Drill Jig - 1/2" Bit - 2" Spacing
3/4" PVC Drill Jig - 1/2" Bit - 2.5" Spacing
3/4" PVC Drill Jig - 1/2" Bit - 3" Spacing

Have a suggestion for a mounting clip? Don't be afraid to contact us on our Facebook page, or send us a message here!

www.facebook.com/SFLDesigns/

Like my designs? Help support us by donating to our show!

Thanks for looking at and supporting my designs!