CR-6 SE below touch screen mount

Files you need to make this
From here:

• below_screen_base_v2.STL
• below_screen_pi_mount_longer_feet.STL

From the original:

• .._Ender3_Touchscreen_Pi_Case...STL
• .._Ender3_Touchscreen_Pi_Back...STL
• 3_1_Ender3_Touchscreen_Pi_Clmap.STL

Maybee also print the Touchscreen_Support, I havent tried this but if it fits and helps to keep the Pi up that would be nice.

You can use the original screws that hold the touchscreen.

I wanted to mount my RPI below the touch screen of the printer, so I made this mount.
I had to do some filing with the first version of the below_screen_base.STL to get the screws in straid. For version 2 I made the hols .5mm wider and moved the upper screw a bid closer to the lower one. I however never printed and tested this so comment if I got it right or not.

You need to rotate the screen 180 degrees or have a very flush angled micro usb cable.

How to install and rotate a generic 3,5' LCD screen:
cd ~
git pull https://github.com/goodtft/LCD-show
cd LCD-show
sudo ./LCD35-show 180

I included the solidworks files so if you want feel free to edit.