[3Dino Puzzle] Classic Style T-Rex

This is 3D puzzle that classic style Tyrannosaurus.
Since there are only a few parts, 3D printing time is short and assembly is easy.

[February 09, 2023]
↓New type T-Rex is now available!
https://www.thingiverse.com/thing:5844135

When 3D printing, it is convenient to use packaged STL models with all parts in one package.
STL models are available in two types: Regular and Tight.
(Regular applies to 20,40 parts/packages, Tight applies to 30,50) For "Regular", a pitch of 0.2-0.3 mm and a "Tight" setting of 0.1 mm are suitable. This is adjusted to match the surface roughness of the 3D printed part.
Depending on the maker of the filament, 3D printing with a setting of 0.1mm may be too tight to assemble. In such a case, 3D print the tight parts again with the same settings using the "regular" model.

[Print Settings]
Rafts:No
Supports:No
Infill: 20%
Nozzle: 0.4mm
Filament: PLA
Pitch(Layer height): 0.1mm or 0.3mm
Print speed: 60mm/s
Travel Speed: 100mm/s

[3D Print Time]
Pitch 0.3mm: 1h35min
Pitch 0.1mm: 3h:06min