4 Cup Coffee Carrier

4-cup coffee carrier with car tray

I started with a 2-cup carrier and my son wanted more---4 cups, removeable handle and a tray to put it in when driving. He got them all.

I modeled this with Fusion360.

I wanted it to be hefty enough to safely carry 4 large cups and not melt with the heat of the coffee. I have printed it with PLA and PETG. I tested it with 4 cups of hot water and left it hanging in my sink for 20 minutes. There was no distortion with the PETG. It only sagged about .5mm with the PLA.

I place a small towel under the car tray to keep it level on the passenger seat. The carrier slips into the top of the tray. It was stable for my 30-minute test run.

I know it work with cups from McDonald’s, Dunkin and 7-11.

Printer:
Ender3

Walls/Top/Bottom:
5 layers each

Infill:
30%

I printed the peg with a brim

The carrier and tray each took about 250 grams of filament

This is my first post to Thingiverse.