Odonata — Open source nano

August 2022 edit: I partnered with Armattan Quads to make the Odonata available in retailers worldwide, so check your favorite retailer that carries Armattan products for it!
https://armattanquads.com/odonata-1/
https://pyrodrone.com/products/armattan-odonata-74mm-fpv-drone-frame

This is going to be my first official frame release of 2022, so why not make it open source!

A nano drone that fits in you pocket, rips like a boss, and hums like a dragonfly. Fit through the tiniest of gaps (it's only 20mm tall when built!!), and make small spots feel like a whole world. Better performance than a whoop, with the same batteries and components. Trippy spins, matty flips, inverted yaw spins, you can do it all.

Weighing in at a nice 7.7 grams (that includes all the parts you need in a build), this frame is made for a 25.5x25.5 whoop AIO, 6.6mm tri point m1.4 motor mounting (the pattern found on 070x and 080x motors), and has actual protection at the arm ends. A 74mm wheelbase keeps the footprint small while allowing the larger 40mm props for performance.

If you would like to support future projects, I would be super appreciative if you got me a Arizona or a chocolate croissant ;) https://www.patreon.com/craftedkwads

Getting this frame:
The Odonata is now available in retailers worldwide, distributed and produced through Armattan! https://armattanquads.com/odonata-1/

It is still open source however, so you can choose to get your own cut. Frame BOM for a custom cut is below.

BOM:
1pcs toplate.dxf —1.5mm thick carbon fiber
1pcs bodyplate.dxf— 1.5mm thick carbon fiber
3pcs m2 standoff, 15mm
6pcs m2x(4-6mm) screw

If you have any questions, don't hesitate to hit me up on instagram @craftedkwads https://www.instagram.com/craftedkwads/ or discord, at craftedkwads#7869!