3 Gear Tranny Gshot Gspeed Carbon Frame Mount

This mount is for the Gspeed Carbon Rails build designed for the Gshot and using a standard 3 gear tranny.. Specifically with dig.It rotates the tranny 10 degrees to the side for motor clearing of the right rail.. This is not retro fit to the skid plate that comes with the Gshot or others. You need to tack glue the mount first to the skid then using the holes provided on the skid drill 2.5mm holes for the screws through the mount. In this method you can use it on any skid just align it glue drill holes smaller than the screws using original holes.

Allows for a cheaper tranny build
Allows the usage of a HW FOC motor and any motor.
Allows the use of a rear dig.
You need to print at 100% infill and maybe play with thicker wall settings.