Sega Mega PI

Hi there,

this is my Raspberry PI Megadrive Case. The parts are designed to fit in the existing ports / screwing holes. You have to remove some parts inside the Mega Drive but you will see it which parts to remove when you assamble it. I used a Dremel for that work.

If you are from Germany there is a .txt file with the parts i used. And there is the original .DXF file in there in case you like to change something. I used a Raspberry pi 4.

I used hot glue to secure the USB ports.

There is not much to explain about that, easy to print and nice to have.

for the Cardridge i used following print and scaled it up.

https://www.thingiverse.com/thing:4078295

Have fun