Ender 3 Laser Front Holder

I made this to mount the official Creality laser cutter/engraver to the front side of the print head. It should work with any 33mm square laser head. This blocks the fan, so you don't want to leave the laser in while doing any 3D printing. The hole allows air to go to the fan once you remove the laser.

I wanted to mount mine to the front of the print head so I could use the full print volume for the laser. Side mounts limit you on distance in the X axis.

To mount it to the print head, I use two short self-tapping screws. Double check your clearances, but the holes are positioned far enough back to miss the fan and far enough forward to miss the extruder head.

When the laser isn't in use, I take it out, but leave the mount in place.