Wall mount for M-Audio Air 192|6

This mount made for the "M-Audio Air 192|6" sound card. It should also be suitable for the younger version, AIR 192|4.

The card can only be mounted in one direction, with the front plugs facing up. It cannot be turned over in this a mount.

The rear left mount closes the XLR line 1 plug. This will only be a problem for the AIR 192/4 version when using a microphone. I don't want to bother with solving, but it's not difficult to do.

Source

Printing disclaimer

You must have a well calibrated printer including correct flow setting for the filament which you suppose to use. The printing tolerance is 0.15mm.

If you're not sure or didn't understand what I'm talking about - don't waste the time to make this thing. Or don't blame me after, that your printed parts don't fit together.

Also in some cases you'll need to use the tools (needle files for corners, drill bits for holes and etc.) to reach the best result from the printed model. Especially if use don't use Linear Advance or similar algorithm. You shouldn't expect that the model will be fine immediately from the printer. At least not always :)