Not-So-Slimbox (Regular Cherry-style switches)

This is a remix of Jfedor's Slimbox, adapted for use with normal full sized cherry mx style switches.

It also requires no screws nor glue to be kept together.

Update 2:

• Added Less tight caps as a remix with wider holes for switch stem and thinner outer walls. Please try the original first though :)

Update 1:

• Added Top_Click_in version with significantly thinner floors for the main 12 buttons, allowing some switches to click in with their notches rather than deforming.
• See picture for exaple

Features/differences from original

• Adapted to use full size mechanical switches
  • Height increaced to ~25 mm (hence the name)
• Button caps adjusted to fit silicone o-ring (1.25-2.50 mm) under them for dumpening (optional)
• Requires no screws or glue to be kept together
• (pretty much) All new microcontroller code that allows for:
  • Debouncing on per-button basis
    • ever had your input registered twice on one press? Never again!
  • S.O.C.D cleaning of your liking (trust me, you will need this)
    • ever pressed forward AND back simultaniously and had the game freak out? Not going to happen any more!

Code

The code can be found >> here << and is suited for any ATmega32U4- based board.

Originally forked from jfedor2/gamepad repo, but departed heavliy from it.

Switches

I used Kalilh Box Royal and Outemu Silent Gray and I liked boxed ones more. The traditional "pillar"- style stem seems a bit to wobbly for the sizes of button caps here.

Depending on the switch you chose, your mileage may vary.

Print settings

• Used fillament: PET-G
• Layer height: 0.15 mm
• Infill: 25%, Hexagon pattern
• No supports
• No raft
• Top and buttons printed face down