Smartphone Stand #8

This is a development of the smartphone stand # 6 (thing: 5336069) that I made before.
The structure has been changed from before, and the angle of the stand has been reduced by nearly 10 degrees. In addition, it is now possible to stand with the power supply cable stuck in the smartphone.

There are three types of hinge gap widths as files. It is recommended to print "hinge_gap_test.stl" first to determine which gap is appropriate.

smartphone_stand_gap02.stl ... gap width = 0.2mm
smartphone_stand_gap03.stl ... gap width = 0.3mm
smartphone_stand_gap04.stl ... gap width = 0.4mm

[size when folded]
-normal version
width:40mm, thickness:9mm, length:78.5mm
-Big version
width:45mm, thickness:9mm, length:88.5mm

[print conditions]
-printing type: FDM
-printer: Original Prusa i3 MKS
-filament: PLA
-support: no
-brim: no
-raft: doesn't matter
-print directions: Please refer to the photo

[revisions]
2022/04/20
The long version is a little less stable against lateral tilt, so I widened the width from 40mm to 45mm. Along with this, the name was changed from long version to big version.

2022/04/18
I add a long version. It has three slots. This is suitable for cable with long head.

2022/04/14
The structure of the claws for locking has been partially revised so that it can stand stably.
The width was increased from 35 mm to 40 mm.